What Are the Advantages of Tanning Booths With Attached Dressing Rooms?

Tanning booths come in two basic styles. They are either powered by long tube VHR style lamps, or they utilize HP or high pressure lamps 제주룸싸롱. When used correctly both systems can produce great results. High pressure booths tend to be much more expensive than VHR systems and are thus less common because the higher operating costs and high initial investment. In order to cover these expenses the per session price is higher than VHR booths.

Entry level long-tube VHR booths are relatively inexpensive compared to lay-down tanning beds with similar outputs. This makes them advantageous for both the consumer and the salon owner. Not only are they often times less expensive than beds they require only half of the square footage. In smaller salons that may only have 1000 square feet this can be a very important consideration. Rent is usually the most expensive fixed overhead cost for a tanning salon which makes minimizing the square footage a must.

A standard tanning booth fits within a 5′ by 5′ square and requires roughly the same amount of space for clients to undress in. This can be accomplished in two ways. One solution is to build a permanent room that is roughly 5 feet wide by 8.5 feet deep and placing the tanning booth in rear of the room. This allows plenty of space in front of the unit to be used as a changing room. The second more cost effective method is to buy a booth with the dressing room already attached.

Not only do attached dressing rooms require less space, but they are also considerably less expensive than building solid walls. They can be installed and working in under an hour, whereas building a permanent room can take up to a week from start to finish. The dust and inconvenience involved in the construction of permanent rooms are other downsides that often convince pre-existing salon owners to opt for the attached dressing room option.

In the past the main attraction to going with a permanent room was for aesthetic reasons. It was also standard to build permanent walls because before companies began building modular wall systems specifically designed for tanning salons, it was the only option for tanning beds. As dressing rooms have evolved they have gotten to the point where they look just as pleasing as the finished look of solid walls both inside and out. When multiple tanning units are placed next to each other at a slight angle they produce a very warm and soothing look.

Many stand-ups require good air-flow to keep the tanner and lamps cool. It is important that the lamps be kept cool because at higher temperatures their performance suffers. Surrounding a unit with permanent walls can hamper the ability of the unit to easily breathe and reduce the booths output. With all of the advances and benefits of attached dressing rooms and tanning booths in general, it is no wonder that they have continually gained in popularity over the past few years. Most importantly is ability for a single tanning booth to generate more revenue than a similar tanning bed with less up-front costs.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *